Eject and Power Button Removal  | | 1 | Diskette eject button | | 2 | Power button | |
To remove the eject and power buttons in the small form-factor chassis, perform the following steps:
- Lay the computer cover on a flat work surface, with the inside of the top cover facing up.
- To remove the 3.5-inch diskette-drive eject button, pull gently on the plastic part of the button until it comes free.
- To remove the power button, use a small screwdriver and push in the two plastic clips that hold the button to the bezel. When these clips are released, the button and the spring come free from the bezel.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น