Computer Cover Replacement

Computer Cover Replacement

To replace the small form-factor chassis computer cover, perform the following steps:

1. Face the front of the computer and hold the cover at a slight angle
   
   
2. Align the bottom of the cover with the bottom of the chassis and insert the hooks on the cover into the recessed slots on the computer chassis so that the tabs catch the hooks inside the slots.
   
   
3. Pivot the cover down toward the back of the chassis and into position.
   
   Make sure that the securing buttons click into place.
   
   
4. If you wish to install a padlock, slide the padlock ring out of the cover.